Home > Shop by Category > Commercial Doors > Commercial Motor Operators > Zap Controls Operators >

8825-3-HP-C Series 3 Super-Drive Operator

8825-3-HP-C, Zap 8825

Alternative Views:

Our Price: $906.00

Product Code: 8825-3-HP-C

Zap Controls- 8825-3-HP-C Series 3 Super-Drive Motor

Model Specific Features:
  • Multi-Voltage: 115/230V A/C Supply
  • Sectional Door Motor-Drive Kit
  • Comes with 5" (125mm) Driven Jackshaft Pulley to Operate cable drums up to 8.75" (222mm)
  • Suitable for Doors up to 400 sq ft (33 sq meters)
  • Suitable For Low Headroom, Standard Lift, and High Lift Doors from 10'-24' wide to 16'-20' high
  • Suitable for High Lift Doors up to 54" and Vertical Lift Doors
General Features:

  • Continuous duty rated DC Motor with controller, producing a powerful soft start/soft stop output of 650 Newtons of force to drive commercial sectional doors while reducing mechanical impacts that cause premature wear of door components
  • NEMA 4X controller standard
  • Available motor cover available for wet locations
  • Drive Reduction- Worm drive gearbox & V-Belt reduction drive with floor level, adjustable belt tensioning/ emergency release lever
  • Wiring type- C2 (factory default), B2 failsafe is standard with the addition of approved photo eye
  • Radio Control and External Receiver Terminals- Terminal strip provided inside the controller to provide quick, convenient connections for adding external radio controls receivers from any desired manufacturer
  • Bearings and Belts- Drive systems use industrial grade bearings and automotive grade long life v-belts. The simplistic service design concept allows simple service of component in a matter of moments.
  • Construction-Heavy-Duty 8-gauge electro-plate finish steel frame, industrial bearings, worm drive gear box, aluminum drive pulley, secured with key stock and setscrew for simple servicing
  • Push Button Station- Control unit acts as the standard 3-button station for open/close/stop functions. Controller may mounted remotely up to 24 feet away from the operator, provided it is to be wired with other external control devices that are designed to function as the primary door controls. Power supply is wired directly to the controller not the motor. Low voltage motor cable is supplied for easy wiring. Value Added Standard Features
  • Safety stop and reverse- Inherent motor current sensing system automatically incorporates and safety stop before reopening in soft start.
  • Auto-close timer- Fully programmable auto-close timer automatically closes the door. (4 minutes) Requires the addition of approved photo cell.
  • Part open programming (Programmable mid stop)- Programmable part open to stop door at predetermined height.
  • Prevent door operation interlock- Built in interlock to prevent door operation, used with truck restraint systems, shared track applications or pass doors.
  • Max run time protection- Inherent motor current sensing system provides automatic max runtime protection.
  • Emergency egress manual operation-Emergency manual operation using a ground level over-ride lever disconnect. When lever is released, the door will operate manually by hand as if no operator is connected to the door. This unique system eliminates the need to electrically interlock the disconnect as the operator has no mechanical limits and physically disconnects from all drive systems when released. It also provides ground level adjustment of the motor drive belt.
  • Service due reminder- May be activated to ensure regularly scheduled maintenance based on cycles of usage.
  • Versatile mounting configurations- 8825-3-HPC/D may be mounted in standard vertical, horizontal, inverted, inverted center mount inside the cable drum, or rear mount torsion configurations. Some applications may require the use of a longer Bowden cable for proper installation.
  • Operators are pre configured to accept 1.25” shaft
  • For 1” shafts order adapter insert PN ZA0191
  • The maximum door weight for sizes listed above is 1800 Lbs
  • The minimum door height 9’6”
Optional Accessories:

Share your knowledge of this product. Be the first to write a review »